Health and Safety Management

Health and Safety Management Essay

The British Airways Company being a member of the European airlines’ royal family, carries cargo and passengers to destinations exceeding 150 in some 75 states from hubs at the city of London’s Heathrow, Gatwick and airports in London city. The carrier does its operations to a fleet of aircraft exceeding 240, which consist mainly of Boeing jets and Airbus. The BA (British Airways) stretches its network and services to destinations that exceeds 400 in total, through agreements of joint business and relationships that are code shared with AMR’s airlines from America and Oneworld alliance members, for instance, Qantas. Iberia, which was Spain’s number one airline, merged with the BA (British Airways) in 2011 that led to the formation of IAG (International Airlines Group).

The company comprises of a workforce personnel who add up to approximately 57,000, who happen to be distributed to several sectors or sections, for instance, the management, customer service, grounds operations, security, finance, and so on. However, BA being a well recognized airline company, my company is an affiliate of it whereby it deals with clearing and forwarding of goods that are being transported. The company does its operations on ground level only mainly for BA airlines, and it has a workforce of about 450 employees. The employees are spread across and all over within the airline’s are of work (grounds only). The company mainly deals with luggage on transport or that are imported or exported, cleaning of the aircraft, luggage inspection and so on.

Health and Safety Management

For every company that has employees or workforce that exceeds five in number, should come up with health and safety management measures as required by law in addition to several other management of safety that are subjected as legal requirements. The British Airways (BA) is one of the companies that are subjected to this. Every year, over 200 people get killed and over a million get serious injuries every year at their work stations or places. Those who suffer from illnesses made worse by or caused by their work are over two million. Forestry industries are the industries that are well known to be more dangerous, and workers in this sector are prone to more dangers that can result to death and/or illnesses when they are at work compared to any other industry or company, for instance, in construction sites or even airports in this case. However, no danger is greater than the other, provided that it can maim or even kill, it is still danger and for that reason, safety and health measures should to be put to safeguard the lives of the workers at the work premises.

Health and Safety Management
Health and Safety Management

The provision of health and safety management training and information has its importance to every individual in instances where it helps to; ensure that workers or employees is not made ill or/and injured by the kind of works that they engage themselves in, developing of a culture that is safe and of positive health, whereby healthy working and safety becomes every worker’s second nature, realizing and finding out how to manage safety and health better and finally, meeting the legal obligation of protecting the health and safety management of workers.

Training the workers effectively also has its significance, whereby; it contributes towards enabling the workers to be experienced in safety and health, assists companies to keep away from stresses that ill health and accidents cause, and finally, help the companies to stay away from financial expenses that are likely to be caused due to ill health occupations and accidents. In addition, it is important to consider that, not all losses are covered by the insurance company. Products that are damaged, production that are lost and workforce that lacks motivation can all be the cause.

Health & Safety in Airports

Health and safety management in airports is paramount in the delivery of every project, and operate a system of safety management. The system of system management adopts the main beliefs of the guidance on successful health and safety management and is controlled in full observance with every current legislation safety. Young and Wells (2011 p. 78) give out a suggestion that, highlighting that is done is normally based on regulations on construction, design and management (2007) with airports gratifying the role of contractor or principal contractor, the assessment of risk for the purposes of identifying hazards, risk evaluation, implementation of harmless and secure systems of work and related controls, providing training and awareness for every employee from every level and finally, controlling of the sub contractors.

Like in most airports, according to Fuller and Varssie (2004 p. 112), the health and safety management and systems, replicates detailed approach to in the provision of work for every employee and the company’s duties to others. The company has a safety record that is of excellence, managers who normally attend course of safe management, are usually trained with perfection. The monitoring and the enforcement of the policy regarding health and safety management performance across every business activity through:

  • Toolbox talks
  • Safety audits and inspections
  • Reporting of accidents and near miss
  • Regular reports about safety
  • The involvement of a member of staff and communications
  • Regular meetings regarding management team, with a resilient stress on performance of safety
  • Regular meetings on management with a resilient highlighting on management, safety and performance

Accident assessment at workplace

According to Ludwig and Ayres (2007 p. 67) they suggest that, there are various common accidents that do occur in workplace. Injuries at places of work that are suffered by workers who work in the airport, are not restricted to scrapes, paper cuts and other negligible issues. A good number of workers (probably thousands) — whether they conduct their work inside an office or at a site that construction is underway — put up with incapacitating, life-changing injuries every year. If anyone or a loved one for that matter, became ill withed an injury when he was on his place of work, he should seek out for the assistance he needs as soon as possible.

According to Ludwig and Ayres (2007 p. 76), waiting excessively for so long to file an allegation, could put one’s capability of obtaining full reimbursement at jeopardy. For example, Hank Barnett of The Barnett Law Firm has important familiarity of helping workers who are injured to obtain their compensation via the compensation system of Georgia’s workers’. As of 1983, he has assisted a lot of clients file winning claims or appeals a refutation of reimbursement benefits of workers’. He figures out the functionality of the system, has familiarity in dealing with companies that handle indemnity (insurance companies) and works hard to defend the rights of his clients at any given time.

Common Injuries Due to a Workplace Accident

A number of law firms, among them, The Barnett Law, Firm have assisted workers with injuries who are from the range of syndrome of carpal tunnel and injuries of repetitive stress to accidents that have caused a catastrophic death of a cherished one. It is understood that that a number of injuries may have need of an employer to create accommodations for instance, an impermanent change in duties of work, at the same time as others averts the injured worker from working for extensive periods of time. Whatever the state of affairs, According to Fuller and Varssie (2004 p. 134), the law will make sure that the injured worker is given the care and reimbursement he necessitates. Other common workplace injuries include:

  • Neck and back injuries
  • Injuries of the spinal cord
  • Brain trauma (TBI) and head injuries
  • RSD (reflex sympathetic dystrophy) and chronic pain
  • Ankle, knee and leg, injuries
  • Occupational / workplace disease
  • Burns or injuries those are chemically-related
  • Psychological disorders
  • Aggravation of pre-obtainable injuries

The law is conscious that one is going through a traumatic time. Therefore, it concentrates on getting results fast and provides the clients with the kind of respect they ought to have (National Research Council 2012 p. 89).

Common examples of accidents at work

Accidents at places of work can occur at whichever time and to any person whether an individual is working in an office, a warehouse or a shop. According to Fuller and Varssie (2004 p. 167), scores of these will rely on the kind of working surroundings, for example, recurring Strain Injury is more probable to occur in an office like place of work and injuries of the back from physical work. Despite the fact that it is the employer‘s responsibility of anyone to minimize the risk of accidents, they do unluckily take place from time to time. There are scores of injuries of dissimilar types that can come to pass in the places of work including:

Trips and Slips

Just about a third of accidents that come about in the places of work are a consequence of trips and slips. Trips and slips injuries take place mainly for the reasons that are relating to wet floors because of bad weather poor or housekeeping, or objects hindering the footpath for example cables or floors that are uneven. Young and Wells (2011 p. 126) suggest that these injuries can vary from negligible bruises and bumps to main fractures. To minimize such incidences or accidents then some measures have to be put to combat injuries that are liable to be brought about by trips and slips. Ensuring that there should be no wet floor and incase of any, then it should be dried up immediately. The floors should be rough like to enhance grip while walking hence no trips will be likely to occur, and finally, doing a thorough housekeeping and ensuring that no object is hindering the footpath. If this is followed, least amount accidents will be witnessed.


Yet again this is an additional major reason of accidents in places of work. Accidents that are resulted by lifting are more possible to take place amongst those staff members who have to take on manual management including pulling, pushing, lowering, lifting or carrying huge items on a customary basis. An injury can take place if the maneuver is not done in the approved manner or when an individual has not been shown how to perform the task as it should be in line with health and safety management course of action. People in this particular of environment should be well taught on how to perform these tasks appropriately in order to avoid injuries at work. In addition, the use of machinery should come to place in order to make their work easier when it comes to lifting of heavy objects, for example, the use of fork lifts


According to National Research Council (2012 p. 109), this kind of accident can consist of falling from stepladders or other platforms that are raised from the ground, for example, scaffolding. Injuries that are obtained from falling can array from slight strains or sprains to major back or head fractures and injuries. In this scenario, there is only one simple step that can keep individuals in the places of work safe, and that is simply them being watchful and careful

Workplace Traffic Accidents

These can take place in any place of work that makes full use of motorized vehicles like for example, in warehouses, and airports for that matter. Injuries can take place if the automobile that is being used, crashes or overturns or when items descend from it. The safety measures for this case are quite strict and should be followed in order to avoid such cases. As Ludwig and Ayres (2007 p. 89) suggests that the staff using the automobile, should acquire appropriate training on how to use the machinery, in terms of the required speed, maximum weight to be lifted (commonly in forklifts) and so on, because when it comes to automobiles, it is required that care and watchfulness should be the order of the duty.


Young and Wells (2011 p. 117) suggest that individuals who do their works in the kitchen, are not the only ones who can go through major or minor burn injuries, but even those perform electrical work are also capable of suffering from burns typically because of shock caused by electricity. The only safety measures to be put to practice in this situation, is the wearing of gloves at all times and never handling hot or naked wires with bare hands.

Neck and Back injuries

Despite the fact that working in an office can appear safe enough, having the same sitting position from time to time can occasionally result to neck and back injuries. According to Reese (2009 p. 113), this can take place if an individual is not in the appropriate sitting position, for instance, when the chair too low or high for the desk, no support of the back, when the computer too low so drooping over the desk. Getting the appropriate office furniture is the solution on top of sitting in the correct position, normally, 90 degrees and eyes straight to the screen.

Driving accidents – these take place to those individuals, who engage in driving as part of their work, for instance, taxi drivers, dispatch riders, sales rep, fast food delivery and so on. Following traffic rules is the only solution to avoid accidents, which is common sense.

Heavy apparatus – members of staff who work with heavy and plant apparatus for instance industries that deal with construction can put up with major work accidents. The use of machinery should be put to practice and weight balancing should also be put in mind to avoid accidents that are being caused doe to overload.

The RSI (Repetitive Strain Injury) – is mainly resulted by excessive use of the arms or hands to do a recurring job for so long without taking a break, for instance, factory work, typing, writing, driving, and so on. Taking a break is important n this case and this allows the body to coordinate well.

Problems with Vision– this injury can frequently take place to the individuals who make use of computers as their working toll on a daily basis. This injury is becoming the most widespread injury because of the frequent exploit of computers in the place of work.

PTSD (Post-Traumatic Stress Disorder) – according to Taylor (2005 p. 167), it is a type of a concern disorder that is able to arise after an individual has experienced or witnessed a shocking and disturbing event that drew in the risk of injury or death. Post-Traumatic Stress Disorder is more frequent in jobs of, for example, driving as one could possibly be involved in a dreadful car accident, or working in a business that may possibly be held up, for example, banks, post office or bookmakers.

Example of an Accident That Occurred

Not much time has passed since one of the mentioned accidents happened to one of the workers and sustained serious injuries that he obtained from burns caused by electric shock. The worker and his colleagues left their respective places of work late in the night and were headed for the engineering department where all the repairs are done. They normally hang out there as they catch up on old time stories, because apparently, they happened to be friends who were united together by the job that they were doing. It rained heavily that night that the drainage system was becoming a nuisance, so the rain water flooded everywhere and water managed to find its way in the room. Peter accidentally dropped his phone and rushed to pick it up, but without knowing, he supported himself with the wall and his other hand reaching for the wet phone and got an electric shock that was caused by a naked cable that was being used for welding. The burns were so serious that his hand had to be amputated. Following this incident, the colleagues also developed PTSD (Post-Traumatic Stress Disorder) that made them to develop fear of that particular place for the reasons that, it reminds them of that incident.

In such cases, according to National Research Council (2012 p. 78), there are measures that if were put into practice, the occurrence would not have happened. The first thing that should have been done is making sure that all the apparatus that use electricity especially of high voltages, should have been properly checked, managed and repaired, for the reason that any naked wire can result to serious damage as experienced by the staff member. The second thing that should have been done, is ensuring that water drainage system should be regularly checked and corrections should be done upon being spotted, because apart from the shocking incident, water can make floors slippery hence casing someone to trip and fall, something that can bring about head, back or even spinal injuries, and as known, these are deadly injuries with severe results. Lastly, tools must never be left in the open, especially electric tools; they should be disconnected from any source of electricity and be stored and kept in dry places in order to reduce such cases.


Fuller, C., & Vassie, L. H. (2004). Health and safety management: principles and best practice. Harlow (Essex), Pearson Education.

Ludwig, D. A., & Ayres, M. (2007). Safety management systems for airports. Washington, D.C., Transportation Research Board. National Research Council (U.S.), Airport Cooperative Research Program, United States,

Ricondo & Associates, Planport GMBH., Two Hundred, Inc, & Flughafen Zürich.      (2012).Airport apron management and control programs. Washington, D.C., Transportation Research Board.

Reese, C. D. (2009). Occupational health and safety management: a practical approach. Boca   Raton, CRC Press.

Taylor, B. (2005). Effective Environmental, Health and Safety Management Using the Team Approach. Hoboken, John Wiley & Sons.

Young, S. B., & Wells, A. T. (2011). Airport planning and management. New York, McGraw-Hill Professional.

View Business Management Dissertations Here